CONTACT US

Yiqun Packaging Products
Phone: +86-539-5852999
Website: www.sdyiqun.com
Email: yiqunbaozhuang@163.com
Address: East Section of Xuyou Road, Feixian Economic Development Zone, Linyi City, Shandong Province

500ML Automotive air conditioning cleaning agent

+
  • 空调清洗剂-1.jpg

500ML Automotive air conditioning cleaning agent

This product can penetrate deep into the interior of the air conditioner, clean dust, oil, insect stains, and other dirt on the fans and exchangers inside the air conditioner, and emit a pleasant fragrance. It plays a role in maintaining and deodorizing the air conditioning, extending its service life, and is a professional disassembly free cleaning agent for the interior of automotive air conditioning.


Category:

Key words:

cleaning agent

MESSAGE
  • 产品描述
  • Instructions for use
  • Note
  • Parameter
    • Commodity name: 500ML Automotive air conditioning cleaning agent
    • Commodity ID: 1107985316145942528

    This product can penetrate deep into the interior of the air conditioner, clean dust, oil, insect stains, and other dirt on the fans and exchangers inside the air conditioner, and emit a pleasant fragrance. It plays a role in maintaining and deodorizing the air conditioning, extending its service life, and is a professional disassembly free cleaning agent for the interior of automotive air conditioning.

    dddddddddddddddddddddddddddddddddddd

    Key words:
    • cleaning agent
  • Usage:

    Cleaning external circulation operation method:
    1. Open all car doors and windows, check the position of the external air inlet, and if necessary, open the engine hood;
    2. Turn off the air conditioning outlet switch in the car, set the air conditioning to external circulation mode, and adjust the air volume to maximum;
    3. Find the position with the highest suction at the air inlet of the air conditioner, shake the product well, connect the catheter to the nozzle, and insert the catheter at the air inlet;
    4. Press the nozzle button and turn it all the way to the right. Spray the solution for 10 seconds, then press and hold the nozzle and turn it left to reset and stop spraying. Keep the air conditioning running for 3-5 minutes
    Clock, cycle until the solution is sprayed out;
    5. After cleaning, turn on the hot air and continue to run for about 20 minutes, stop the air conditioning operation, and it can be seen that the dirty liquid is discharged from the lower drainage outlet.

    Cleaning internal circulation operation method:
    1. Turn the external circulation mode to the internal circulation mode, and locate the air inlet of the air conditioner in the passenger seat. If there is a filter screen at the air inlet, it should be removed first. Find a clean cloth and place it at the bottom of the air inlet to catch the leakage. Insert the catheter into the air inlet, and spray it with a point spray method every 1-2 seconds. After spraying, turn on hot air for 5-10 minutes to thoroughly dry the product;
    2. Turn off the air conditioning, turn off the engine, and drain the dirty liquid from the lower drain.

  • note
    1. It is recommended to operate under the guidance of professionals to prevent circuit failures;
    2. During the cleaning process, the foam detergent should not be injected too much at one time to avoid causing or damaging the computer board, fan and ECU;
    3. Avoid heat, do not place in the car, store in a cool and dry place below 50 ℃;
    4. When spraying, the aerosol tank must be kept upright and the angle between it and the horizontal plane must not be less than 45 °; 
    5. Keep out of reach of children.

  • Deodorization, energy conservation, sterilization, cleaning
    Net content: 500ml

MESSAGE


Submit